User Tools

Site Tools


en:fsrealwx:aircraft_editor

Aircraft Editor

This is the empty Aircraft-Editor.

1. Start the FS, select the aircraft of your choice and choose the airport, then start the flight. Wait until the flight simulator is ready. Then Click on the “load data from FS” button (see below).

2.Modify all necessary data and click “Save”.

The data will be saved under AircraftConfigs with the filename from the aircraft name (e.g. Piper_PA31T1_Cheyenne_I_D-IBIW.cfg). 

3. After restarting FSrealWX, you can open the load editor and load your aircraft.

en/fsrealwx/aircraft_editor.txt · Last modified: 2014/10/09 12:30 by silloadmin